Vermiculite is the preferred base for vinyl liner swimming pool bottoms as they require a smooth, level, & nonabrasive base.  Strong is the leader in vermiculite (pool krete) for the swimming pool market.  Strong premix pool krete is easily applied and gives a perfectly formed bottom so the liner will not slip or wrinkle.  All of the pools that Penguin Pools builds in the Milwaukee, WI  and Minneapolis, MN area, have vermiculite bottoms.

Along with just doing vermiculite bottoms on all of our inground vinyl liner pools in WI, MN, & IL, we also apply it with a special mixer and pump from Strong Manufacturing.  The mixer and pump give us a perfect consistency throughout the entire pool so we don’t have to worry about some areas being too dry or wet.  The time that it takes » Continue reading “Strong Pool Krete Mixer & Pump – Vermiculite Mixer for Pool Bottoms”

Everyone wants an inground swimming pool build to go smoothly, but things always come up when you least expect it . . . usually when you start digging.  The biggest variable is usually what you are going to find once you start digging over 3′ in the ground. 

Penguin Pools often comes across rock or bad fill in many newer subdivisions.  Builders take fill from one site and put it on another site until they don’t have any more sites to hid the fill.  Rock and buried construction trash makes building an inground pool very challenging.  When building a vinyl liner pool, the walls have to sit on virgin ground so there is no worry about settling.  When you hit soil or earth that doesn’t hold its form / collapses, you need to find away to create virgin soil.  » Continue reading “Building an Vinyl Liner Inground Swimming Pool on Rock”

Getting a custom dig or layout for your inground swimming pool isn’t hard  & shouldn’t cost you more.  Do you want your pool 8′, 6′, 3′ deep?  Depth really shouldn’t matter all that much for your pool builder.  Most builders consider 8′ deep a standard inground pool depth, anything less will take less time to dig and dump the dirt.  While depth is just one aspect of your pool, the amount of shallow end is your other main decision.

Many inground pool builders don’t give customers the options to maximize your shallow end.  You may think that the amount of shallow end doesn’t matter, but think about it.  How often do you stand in an inground pool and not have to tread water?  Most people jump in, swim a little bit then go to the shallow end or a part of the pool that they can stand.  Face it, we aren’t all Michael Phelps in the pool and we need to stand.

» Continue reading “Custom Swimming Pool Digs, Depths, & Dig Specs”

Penguin Pools of Milwaukee, WI offers a full line of vinyl liner replacements.  While we specialize in inground swimming pools, we will do work on above ground pools also.

On standard rectangle or grecian pools our rate is $3,000 + water.  That includes draining the old pool, removing the liner, and up to 5 bags of patching for the bottom of your pool (vermiculite).  We will install new gaskets for your lights, skimmers, main drains, returns, and wall mounted fountains.

The vinyl liner is a standard 20 mil with a 15 year pro-rated warranty.  Upgrades can be done if you want a 30 mil liner, a solid pattern, or foam on the floor of your pool.
You can view all of our liner selections here.

» Continue reading “Vinyl Liner Swimming Pool Replacements – Milwaukee Branch”

Penguin Pools of Milwaukee, WI is now pleased to announce that we are offering and installing the full line of Harmony Outdoor Living Products.  Harmony Outdoor offers modulated outdoor living spaces made from Unilock Pavers. 

By having your designs pre-built, we can install them quicker and for less money than if we built the whole thing from scratch.  You can combine fireplaces, wet bars,  grills, benches, tables, firepits … the options are endless.

These units really transform and inground vinyl liner pool into something great.

If you have any questions or would like Penguin Pools to give you a free estimate, don’t hesitate to contact us directly.

Penguin Pools is now offering excavation services to DIY Pool Builders.  Many customers have been asking for excavation help on their “do it yourself” inground swimming pool builds.  Once homeowners purchase their pool kit online, they need help excavating the actual hole for the pool.

The difference between an easy pool build and a disaster is in the pool dig itself.  If you over dig you will have a lot of stone or vermiculite to fill in, but on the other hand if you under dig you will have hours of hand carving to do.

Penguin Pools has been digging swimming pools for years throughout WI, MN, and nothern IL.  We have three different machines that we can use to dig your pool.

Our Big Machine :: » Continue reading “Swimming Pool Excavation for DIY Pool Builders”

Automating your swimming pool does one primary thing, it simplifies everything.

Depending on the severity of your swimming pool and how many water and light features you have, will determine the size and cost of your automation system.  The more water features (fountains, waterfalls, spas, cascades, wet decks …) you have the larger the system you need with more relays.  While automating your entire swimming pool can be costly, there are ways to benefit from an automation system without getting ridiculous.

Penguin Pools generally puts a Pentair EasyTouch 4P automation system on each new build to help customers reduce utility costs.  By putting in an automation system you can control key components like when you want your pump and light to turn on / off , what temperature to set your pool at (provided you have a heater), or controlling your salt water system.  Manual timers work well to control your pump, that is until they fail and never turn the pump on (algae growth) or off (wasted energy).
By only running your pump enough to turn your water over 2-3 times day, you can save money rather than » Continue reading “Why Automate Your Swimming Pool?”

5 Years ago the Swim Spa market was small and custom.  No one wanted to spend $20,000 + on a spa when they could spend a little more and have a full inground swimming pool.  Times have changed!

People are more exercise and health conscience (or they want to be), plus they are looking to utilize every square inch of their home.  Older Swim Spas only allowed you to swim in place for exercise and rehabilitation.  As the hot tub market has expanded and grown, they have become more influential in the Swim Spa market.  Newer Swim Spas act and look like a large glorified spa.  You can use it to relax, party, or work out.  They come in different colors, shapes, sizes and can now have radios, tvs, or even fountains . . . a far cry from the old “box models”.

The most common and expensive seems to be provided by Endless Spas which has been around for years.  We (Penguin Pools) have installed many of these spas and they do a great job, however they don’t have any of the » Continue reading “Swim Spas Take Off as Space Becomes Smaller”

Penguin Pools is now offering fiberglass swimming pools from Viking.  Viking fiberglass pools are the strongest 1-piece inserts on the market.  While fiberglass pools are more expensive than vinyl liner pools, they have great benefits.

• Easier to keep Clean
• Less Chemical Usage
• No Worries about a Ripped Liner
• Quicker Installation

By partnering with Viking Fiberglass Swimming Pools, Penguin Pools can now offer our customers top of line Fiberglass pools for less.  Just like all of our Vinyl Liner selections, Penguin Pools is also showing all of our Fiberglass Pool Pricing.

By displaying our prices right online, there is no confusion on pricing.  Many companies will not quote a price over the phone or in an email, because they price the pool based on what they think you can afford.  Penguin Pools takes a slightly different approach, we tell you what you are going to pay.  Most companies don’t like that we do that, as that dictates the price for them when customer “shop around”.  Regardless if you are in Milwaukee or Minneapolis, the price on the site is the price you are going to get.

Take for example :: » Continue reading “Viking Fiberglass Swimming Pools”

Once upon a time, the only way to get a unique swimming pool was to have it made of concrete (gunite) and spend a boat load of money.  Free Form pools were exclusive to the rich and people living in Hollywood.   With the time (2 months) cost of a concrete pool, many people are moving towards building vinyl liner free form pools.

Vinyl liner pools are more economical and the technology has improved to the point that building a free form pool is no longer a problem.  Free Form pools take more time to build, but not much more than a standard pool.  Penguin Pools of Milwaukee & Minneapolis can build a “standard” vinyl liner inground pool in roughly 3 days.  In three days we will excavate the hole, build your pool, plumb it, set fixtures, and fill it with water.  The construction of a free form pool takes roughly 5 days as the excavation has to be very precise and takes twice as long.

Free Form Pool - Waterford, WI

When you consider the time that it takes between building a concrete (gunite) and a vinyl liner free from pool, the choice is simple.  » Continue reading “Free Form Swimming Pools are now Common Place”

Penguin Pools of Milwaukee & Minneapolis is opening a new retail location in Lacrosse, WI. The new store will handle above ground and inground pools along with spas and hot tubs.

The Lacrosse, WI location will be the third location for Penguin Pools (parent company Penguin Systems Unlimited) creating one of the strongest companies in the Midwest. Penguin Pools can handle any swimming pool installation or repair job in WI, MN, or Northern IL, Northern IA.

Penguin Pools specializes in Vinyl Liner, Concrete, 1-piece Viking and free form Armor Fiberglass swimming pools along with spas, custom water features, and designer concrete patios. With offices in Minneapolis-St. Paul, Lacrosse & Milwaukee, WI we have the manpower to service anyone in the Midwest.

Feel free to contact us directly at any of our stores.